Septic Tank Float Switches For Pumps and Alarms
Septic Solutions® carries a float switch for every application. Whether you need to control a pump, a panel, or high water alarm Septic Solutions® has the float for you. Check out our wide selection of Septic Float Switches and if you do not see what you need, give us a call at 1-877-925-5132 and we will find for you!
Fast And Free Shipping On All Septic Tank Float Switches
Junior M-Navigator
Mercury Activated Float Switch
Pump Down
Normally Open Contacts For Emptying
- 90 Degree Wide Angle Mercury Activated Pump Switch
- Controls Pumps up to 1/2HP at 120V and 1HP at 240V
- 13 amp, 16/2 SJOW wire, 10' Cord, 120/240V, No Plug
- For use in water and sewage applications

|

Float Activates to ON
in the Raised Position
16 gauge, 2 conductor, SJOW water resistant (CPE) material
UL Listed, SST pipe
mount assembly included
It is not legal to use mercury float switches in the states of Connecticut, Rhode Island, Maine, California, Vermont, Illinois, Minnesota, New York, Louisiana, New Hampshire, and Massachusetts.
|
Can't Find What Your Looking For? Call 1-877-925-5132 For Customer Support!
Navigator Series
Standard Duty Mechanical Float Switch
Pump Down
Normally Open Contacts For Emptying
- 90 Degree Wide Angle Mechanically Activated Pump Switch
- Controls Pumps up to 1/2 HP at 120 V and 1 HP at 240V
- 13 amp, 16/2 SJOW wire, 10' Cord, 120/240V, No Plug
- For use in water and sewage applications
UL Listed, SST pipe
mount assembly included

|

Float Activates to ON
in the Raised Position
16 gauge, 2 conductor, SJOW water resistant (CPE) material
|
Over 20 Years Experience in The Septic Wastewater Industry
SJE PumpMaster® Plus
Mechanical
Pump fLoat Switch
with 15 Foot Cord and Piggy-Back Plug
Pump Down
Normally Open Contacts For Emptying
- Mechanically Activated Wide Angle Pump Switch
- 15 amp, 14/2 SJOW wire, 15' Cord, 120V, With Piggy-back Plug
- Controls Pumps up to 3/4 HP at 120 VAC
- Adjustable pumping range of 7 to 38 inches
- For use in potable water, water, and sewage applications
- UL Listed. Heavy-duty contacts.
This pump switch is not sensitive to rotation or turbulence allowing it to be used in both calm and turbulent applications.

|

Float Activates to ON
in the Raised Position
14 gauge, 2 conductor, SJOW water resistant (CPE) material
|
Call Our Knowledgable & Experienced Sales Staff Toll Free At 1-877-925-5132!
SJE PumpMaster®
Mechanical
Pump fLoat Switch
with 15 Foot Cord WITHOUT PLUG
Pump Down
Normally Open Contacts For Emptying
- Mechanically Activated Wide Angle Pump Switch
- 13 amp, 16/2 SJOW wire, 15' Cord without Plug, 120V
- Controls Pumps up to 1/2 HP at 120 VAC
- Adjustable pumping range of 7 to 38 inches
- For use in potable water, water, and sewage applications
- UL Listed. Heavy-duty contacts.
This pump switch is not sensitive to rotation or turbulence allowing it to be used in both calm and turbulent applications.

|

Float Activates to ON
in the Raised Position
16 gauge, 2 conductor, SJOW water resistant (CPE) material
|
Fast And Free Shipping On All Septic Tank Float Switches
SJE PumpMaster®
Mechanical
Pump fLoat Switch
with 15 Foot Cord WITH PLUG
Pump Down
Normally Open Contacts For Emptying
- Mechanically Activated Wide Angle Pump Switch
- 13 amp, 16/2 SJOW wire, 15' Cord without Plug, 120V
- Controls Pumps up to 1/2 HP at 120 VAC
- Adjustable pumping range of 7 to 38 inches
- For use in potable water, water, and sewage applications
- UL Listed. Heavy-duty contacts.
This pump switch is not sensitive to rotation or turbulence allowing it to be used in both calm and turbulent applications.

|

Float Activates to ON
in the Raised Position
16 gauge, 2 conductor, SJOW water resistant (CPE) material
|
Trust Septic Solutions® To Provide You With Only Quality Products
Navigator Plus
Heavy Duty Mechanical Float Switch
Pump Down
Normally Open Contacts For Emptying
- Mechanically Activated 90 Degree Wide Angle Float Switch
- 15 amp, 14/2 SJOW wire, 10'-15' Cord, 120V, With Plug
- Controls Pumps up to 1 HP at 120 VAC
- Adjustable pumping range of 6 to 36 inches
- For use in water and sewage applications

|

Float Activates to ON
in the Raised Position
14 gauge, 2 conductor, SJOW water resistant (CPE) material
UL Listed, SST pipe
mount assembly included
|
Can't Find What Your Looking For? Call 1-877-925-5132 For Customer Support!
A-Navigator
High Amp Mechanical Float Switch
Pump Down
Normally Open Contacts For Emptying
- Mechanically Activated 90 Degree Wide Angle Float Switch
- 25 amp, 12/2 SJOW wire, 10' Cord, No Plug
- Controls Pumps up to 1-1/2 HP at 120V and 3 HP at 240V
- Adjustable pumping range of 8 to 28 inches
- For use in water and sewage applications
UL Listed, SST pipe
mount assembly included

|

Float Activates to ON
in the Raised Position
12 gauge, 2 conductor, SJOW water resistant (CPE) material
|
Fast And Free Shipping On All Septic Tank Float Switches
Double M-Navigator
Heavy Duty Mercury Float Switch
- Mercury Activated 90 Degree Wide Angle Pump Switches
- 15 amp, 14/3 SJOW wire, 15' Cord, With Plug
- Controls Pumps up to 1 HP at 120V and 2 HP at 240V.
- Adjustable pumping range of 2 to 54 inches
- For use in water and sewage applications

|

Pump Down
Normally Open Contacts For Emptying
Float Activates to ON
in the Raised Position
14 gauge, 3 conductor, SJOW water resistant (CPE) material
UL Listed, SST pipe
mount assembly included
It is not legal to use mercury float switches in the states of Connecticut, Rhode Island, Maine, California, Vermont, Illinois, Minnesota, New York, Louisiana, New Hampshire, and Massachusetts.
|
Call Us Toll Free At 1-877-925-5132 To Talk to Our Friendly Sales Staff
V-Navigator
Vertical Mechanical Float Switch
Pump Down
Normally Open Contacts For Emptying
- Mechanically Activated Verticle Pump Switch
- 10 amp, 16/2 SJOW wire, 10' Cord, 120V, With Plug
- Controls Pumps up to 1/2 HP at 120 VAC
- Designed to operate in confined areas
- Adjustable pumping range of 1 to 6 inches
- For use in water and sewage applications
UL Listed, SST pipe
mount assembly included
Designed to operate in confined areas, This float only moves vertically; therefore it can be used in tight spots where a normal float cannot.

|

Float Activates to ON
in the Raised Position
16 gauge, 2 conductor, SJOW water resistant (CPE) material
|
Over 20 Years Experience in The Septic Wastewater Industry
Fast And Free Shipping On All Septic Tank Float Switches
SJE SignalMaster®
Mechanical Float Control Switch
Pump Down
Normally Open Contacts For Emptying
- Mechanically Activated Narrow Angle Float Switch
- Designed To Activate Control Panels and Alarms
- 5 amp, 18/2 SJOW wire, 15' Cord, 125V/250V, NoPlug
- For use in water, potable water, and sewage applications.
- High Impact, Corrosion Resistant, Polypropylene Float Housing
- The SJE SignalMaster® control switch
is not sensitive to rotation.
UL Listed, SST pipe
mount assembly included

|

Float Activates to ON
in the Raised Position
18 gauge, 2 conductor, SJOW water resistant (CPE) material
|
Trust Septic Solutions® To Provide You With Only Quality Products
M-Pilot Series
Mercury Float Control Switch
Pump Down
Normally Open Contacts For Emptying
-
Mercury Control Duty 10 Degree Narrow-Angle Float Switch
- Designed To Activate Alarms and Control Panels
- 5 amp, 18/2 SJOW wire, 10' or 20' Cord, 120/240V, No Plug
- For use in water and sewage applications

|

Float Activates to ON
in the Raised Position
18 gauge, 3 conductor, SJOW water resistant (CPE) material
UL Listed, SST pipe
mount assembly included
It is not legal to use mercury float switches in the states of Connecticut, Rhode Island, Maine, California, Vermont, Illinois, Minnesota, New York, Louisiana, New Hampshire, and Massachusetts
|
Call Us Toll Free At 1-877-925-5132 To Talk to Our Friendly Sales Staff
Pilot Series
Mechanical float control Switch
Pump Down
Normally Open Contacts For Emptying
-
Mechanically Activated Narrow Angle Float Switch
- Designed for Use On Control Panels and Alarms
- 5 amp, 16/2 SJOW wire, 10' Cord, 120V/240V, No Plug
- For use in water and sewage applications
UL Listed, SST pipe
mount assembly included

|

Float Activates to ON
in the Raised Position
16 gauge, 2 conductor, SJOW water resistant (CPE) material
|
Over 20 Years Experience in The Septic Wastewater Industry
Pilot Series
Mechanical float control Switch
Pump UP - For Low Level alerts
Normally Closed Contacts For Filling
- Mechanically Activated Narrow Angle Float Switch
- Designed for Use On Control Panels and Alarms
- 5 amp, 16/2 SJOW wire, 10' Cord, 120V/240V, No Plug
- For use in water and sewage applications
UL Listed, SST pipe
mount assembly included

|

Float Activates to ON
in the Lowered Position
16 gauge, 2 conductor, SJOW water resistant (CPE) material
|
Can't Find What Your Looking For? Call 1-877-925-5132 For Customer Support!
"I want to thank your company for shipping quick and A+ products. This was the second time we ordered septic parts from you with great success. We have recommend you to many of our neighbors and friends. Keep up the good work!" - Magnolia, TX
Float Switch Accessories: Clamps and Cable Weights
SST FLOAT cLAMP ASSEMBLY
Clamp designed to mount any float switch to a pipe. A zip tie strap is included with all floats, this is an alternative mounting assembly. Also see the weights below.
FREE SHIPPING
When Ordered With A Float Switch
|
|
Cable Weights Are Used In Place Of Clamps, Straps, or Ties
Cable Weight for Float Switch
Provides an accurate pivot point for suspended float switches.
Gripper teeth on clip and weight channel securely lock float cable into place. Cable weight can be adjusted without the use of tools. Impact resistant, non-corrosive, PVC housing for use in liquids up to 140° F
FREE SHIPPING
When Ordered With A Float Switch
|
|
Trust Septic Solutions® To Provide You With Only Quality Products
Cable Weight for Float Switch
Provides an accurate pivot point for suspended float switches.
Weight with screws provided securely lock float cable into place.
FREE SHIPPING
When Ordered With A Float Switch
|
|