Polylok Risers and Lids
Tired of having to dig up your yard every time you need your septic tank pumped out or serviced? Tired of handling extremely heavy concrete lids? Sounds like you are in need of septic tank risers to bring your access to ground level! Our septic tank risers and covers are made from high quality, heavy duty polyethylene plastic which makes them very strong and durable while also allowing them to be easy to handle.
SEPTIC TANK RISERS AND LIDS
FREQUENTLY ASKED QUESTIONS
Below are some frequently asked questions that get fielded by our customer service staff. Take a look, the questions you have may just be answered below!
WILL THE POLYLOK SEPTIC TANK LID FIT DIRECTLY ON THE ADAPTER RING OR DO I NEED TO USE A RISER?
In most cases the lid will fit directly onto the adapter rings, with the exception of the 24'' Heavy Duty Lid. The 24'' Heavy Duty Lid is reinforced on the bottom. This reinforcement is actually taller than what the adapter ring is. Because of this, the 24'' Heavy Duty Lid will only fit on the adapter ring directly if your opening is at least 24'' in diameter. Any opening smaller than 24'' diameter and the lid will not fit. ALL other Polylok lids will attach directly to the adapter ring without the need for a riser.
CAN I CUT THE SEPTIC TANK RISER SYSTEM DOWN TO A SPECIFIC HEIGHT?
No. The Polylok riser system comes in 6'' and 12'' increments and it cannot be cut down to height. Cutting the riser will cause the lid to not secure properly to the cut down riser.
DO I BRING THE SEPTIC TANK RISER SYSTEM JUST BELOW, AT, OR ABOVE GRADE?
It is your own personal choice to bring the riser system to grade, above grade, or leave it just below grade. The riser system seals air tight and water tight, so there is no danger in bringing it to or above grade.
SHOULD I USE THE STANDARD OR THE HEAVY DUTY LID?
The standard lid is strong enough to handle foot traffic and weight up to a small riding lawn mower passing over it. If the riser system is in a high traffic area, or is going to be ran over on a regular basis by lawn equipment, we would recommend the heavy duty lid.
CAN THE POLYLOK SEPTIC TANK RISERS BE STACKED?
Yes. You can stack pretty much any combination of the Polylok Septic Tank Risers to acheive the desired height.
DO THE POLYLOK SEPTIC TANK RISERS AND LIDS COME WITH SCREWS?
Yes. The Polylok Septic Tank Risers come with stainless steel screws to connect them to each other.
For further questions contact us at 1-877-925-5132 or email@example.com