• Elevator Sump System with 1/3 HP Pump and Oil Detection System - Part Number ELV280-7410

Elevator Sump System with 1/3 HP Pump and Oil Detection System

Print

1/2 HP SUMP PUMP, 37 FT MAX HEAD, 70 MAX GPM

The Elevator Sump Water Removal System is used in elevator sump pits to remove water while retaining oil and other hydrocarbons. Water and oil fill the elevator sump pit. As the sump is filling, the oil will float on top of the water. This layer of il will not be pumped from the tank. The water underneath the oil will be pumped out through the discharge pipe to the sewer or other proper disposal area.

In Stock

$1245.00 MSRP: $2350.00

Item #:ELV280-7410

Manufacturer: Septic Solutions

Liberty 280 Series Specifications 


  • 1/2 HP, 115VAC, 8.0A, 60 Hz
  • 50 GPM @ 15ft of Head Pressure
  • Shut Off: 37ft, Max GPM: 70
  • 1-1/2'' NPT Vertical Female Discharge, 3/4'' Solids Handling
  • Vortex Style Impeller
  • Liberty's One-Piece "Unibody" Casting 
  • Includes Quick-Disconnect 10' Power Cord with Plug
  • Dimensions: 9.5'' L x 6.4'' W x 13.2'' T
  • Three Year Warranty

    Oil Alert™ Control Features

    • 120 VAC, Single Phase, 0-15 FLA
    • One Preset Level Sensor For Easty Installation
    • Operates With All Pumps Approved for Sump Pits
    • Remote Alarm Included
    • NEMA Type I Enclosure
    • ASME A17.1 COMPLIANT
    • Dimensions: 9.75'' H  x 5.02'' W x 5.25'' D

    Oil Alert™ Operation

    On liquid rise, level reaches pump “start” probe to start the pump. Pump will remain on until level is below “off” probe. The “off” probe senses air or oil and turns the pump off so the oil layer will not be pumped out of the tank. If the level reaches alarm probe and mechanical float, the system will differentiate between water and oil and activate the remote alarm.

    1/2 HP Elevator Sump Pump System Downloadable Documents

    FileName
    283_Features View Download
    7410_OilAlert_Specifications View Download