+1-(877)-925-5132 - Toll Free Phone
www.septicsoutions.com - Website
Polylok 24" Septic Tank Riser Safety Screen
The Polylok 24" Septic Tank Riser Safety Screen (Model 3008-SS) is a critical safety accessory designed to provide an extra layer of protection for your septic system. This bright yellow, heavy-duty screen installs inside the top of your Polylok riser stack, acting as a secondary barrier to prevent accidental entry into the septic tank if the riser lid is damaged, removed, or accidentally left off—helping safeguard children, pets, and unsuspecting individuals.
Made from durable ABS plastic, this safety screen is engineered for reliability and visibility, ensuring peace of mind in residential settings where septic access points are present.
Note: This item will not fit the 24'' x 3'' Pan Riser (#3008-RP) or the 24'' x 2'' Grade Riser (3008-GR2).
In Stock
Item #:3008-SS
Manufacturer:Polylok
Key Features and Benefits
- Secondary Safety Barrier — Prevents falls or entry into the open septic tank if the primary lid is compromised, damaged, or not replaced after service.
- Bright Yellow Color — Highly visible for added safety awareness and easy identification during inspections.
- Built-in Handle — Allows for quick, easy removal when access to the tank is needed (e.g., during pumping or maintenance).
- Strong Load Capacity — Tested to withstand 250 lbs per square foot—provides solid support under normal conditions.
- Secure Installation — Includes stainless steel screws for firm attachment to the riser.
- Sits Inside the Top Riser — Discreetly fits within the uppermost section of the stack without protruding or affecting lid placement.
- Made in the USA — From Polylok, a trusted name in onsite wastewater and septic products.
Specifications
- Diameter: Designed for 24" Polylok risers
- Material: Heavy-duty ABS plastic
- Color: Bright yellow
- Compatibility: Fits only Polylok 24" x 6" or 24'' x 12'' risers (e.g., model #3008, 3008-R12). Installs in the uppermost riser section of the stack.
- Important Compatibility Note: Does not fit the Polylok 24" x 2" Grade Riser (#3008-GR2), 24" x 3" Pan Riser (#3008-RP), or certain older variants with wall flats. Not compatible with other brands' risers.
- Load Rating: Tested at 250 lbs per sq. ft.
- Included: Safety screen with built-in handle + installation screws
Easy Installation
- Ensure your Polylok riser system uses at least one 24" riser section at the top of the stack.
- Place the safety screen inside the uppermost 6" riser (it sits securely on the internal ledge/ribs).
- Secure it in place using the provided stainless steel screws (follow an alternating pattern for even fastening).
- Install your Polylok 24" riser lid on top (screwed down as normal) to complete the assembly.
- Backfill to grade level per standard riser guidelines.
Recommendation: Always use this safety screen for septic systems near children, pets, or high-traffic areas. It complements—but does not replace—the primary riser lid.