Becker 20ft Windmill Aerator System for Ponds

20' Four Legged Windmill Kit with 50' of Poly Tubing, 100' of Weighted Tubing, and (1) QS2 Quick Sink Diffuser

Let mother nature aerate your pond with a Becker Windmill aerator system. Windmill aerators are ideal for aerating remote ponds with no electricity nearby. The Becker Windmill system includes a stable four leg design, a 6 feet diameter head with 12 blades that operate in winds as low as 5 miles per hour, and produces 2.4 to 5 cfm at up to 40' deep depending on air speed. Becker Windmills have been Made in the USA since 1970!

Ships in 10-15 Business Days

$3149.99MSRP: $3500.00

Item #:BWM20W

Manufacturer:PondPlus+

Becker 20' Windmill System Includes:

20' Tall Windmill Aerator
50' of Poly Tubing to get from Windmill to Pond's Edge
100' of Weighted Tubing
(1) QS2 Dual Head Quick Sink Diffuser
48'' long anchor stakes
Base hinge set for easier installation and ability to lower tower for maintenance or impending storms

Becker 20' Windmill BWM20W Specifications:

Stable four leg design
Long-lasting, reinforced neoprene diaphragm
6' diameter head with 12 blades
Operates at wind speeds as low as 5 mph
Produces 2.4 to 5 cfm depending on air speed
Aerates up to 40' Deep
Effective aeration for up to 2 acres depending on pond shape and depth
Includes over speed protection - tail section will turn head in high winds preventing over spinning
Overall height: 23', Base Stance: 7' square

Becker Windmill Advantages

ENGINEERED FOR EFFICIENCY

Large, 72" diameter fan wheel with 12 tapered blades that are engineered to start turning at wind speeds as low as 5 mph. The blades are also designed to develop high power in strong winds.
Reinforced Diaphragm - The piston diaphragm assembly is 60% larger than other brands. In conjunction with the 72" blade assembly, it will pump 60% more air into your water than other brands.
Automatic Over-Speed Protection - The tail design keeps the windmill facing directly into the wind. When wind speeds reach 30 mph, the tail forces the fan wheel to turn 12°-15° away from the direct wind so that it cannot operate over-speed.

MANUFACTURED FOR DURABILITY

16 gauge galvanized steel tower for strength and durability.
Advanced Anchoring System - At the bottom of each tower leg is a 6-bolt anchor stake clamp. The anchor stakes are 1" steel tubes pinched at both ends. The anchor stake slides down through the clamp as you drive it into the ground. This anchoring system allows you to level your tower as you tighten the clamps.
Reinforced Diaphragm - Reinforced neoprene diaphragm that is die-cut for accuracy and longevity.
Heavy-Duty Crankshaft and Bearings - The crankshaft is made of high strength, 1045 TGP steel. Bearings are permanently grease-sealed and are designed for heavy load capacity.

DESIGNED FOR SIMPLICITY

Design is that of classic windmills so it looks right at home anywhere.
Low Maintenance - All Becker Windmills are designed with ease of assembly and low maintenance in mind. We're so confident in the quality that we offer a 5 Year Limited Warranty on all our windmills!