Septic Tank Effluent Filters

Tuf-Tite EF-6 Effluent Filter & Baffle
Best Seller! Extend the life of your drainfield!

Includes filter, housing, bushing, and gas/solids deflector.

• 6" Diameter Filter
• Rated to Filter 1500 Gallons Per Day (GPD)
• 244 ft. of 1/16" filtration area.
• Molded in Gas/Solids Defector
• Fits 4" Schedule 40 & SDR-35 thin wall pipe.
• Injection molded HDPE, Non-corrosive
• Simple to install, Easy to clean
• May be used as Outlet Tee
• ANSI/NSF Approved

Tuf-Tite Ef-4 Effluent Filter & Housing
Extend the life of your drainfield!

Includes filter, housing, and bushing. Does not include Gas/Solids Deflector which can be purchased below.

• 4" Diameter Filter
• Rated to Filter 800 Gallons Per Day (GPD)
• 86 ft. of 1/16" filtration area.
• Fits 4" Schedule 40 & SDR-35 thin wall pipe.
• Injection molded HDPE, Non-corrosive
• Simple to install, Easy to clean
• May be used as Outlet Tee
• ANSI/NSF Approved

Tuf-Tite Ef-4 Effluent Filter Only
Extend the life of your drainfield!

• 4" Diameter Filter
• Rated to Filter 800 Gallons Per Day (GPD)
• 86 ft. of 1/16" filtration area.
• Fits 4" Schedule 40 & SDR-35 thin wall pipe.
• Injection molded HDPE, Non-corrosive
• Simple to install, Easy to clean
• May be used as Outlet Tee
• ANSI/NSF Approved
• Accepts 1/2'' PVC Pipe to make an extension handle
• Fitler approximately 18'' tall

Sim/Tech 4" Septic Tank Bristle Filter
Best Seller! Extend the life of your drainfield!

• Designed with non-directional bristles for unrestricted flow of effluent
• Allows biological maturing and sloughing to maximize septic tank efficiency
• Provides well over 1/2 mile of filtration media with over 319 cu. in. of open area to eliminate clogging
• 2,215 sq. in. of filtering surface allow a flow rate of over 1200 GPD, filtering to 1/16" diamater
• Filtering surface is achieved with unique triangular bristle that more than doubles the filtering surface, with no uniform holes or slots to plug
• 90 degree handle for easy installation and removal
• Adapts to all types of 4" pipe
• Self-locking bristles hold the filter firmly in place, eliminitatin "filter float up"
• Flexible design makes it easy to install in hard to reach places and makes replacing the filter a breeze
• The filters designed shape creates a debris separation space which naturally sorts debris according to size and mass, ensures even filter usage for a long lifespand and maximizes circular flow

Sim/Tech STF-130 Maintenance sleeve

The STF-130 maintenance sleeve inserts into the outlet of the tank to block off flow, preventing built up solids and unfiltered effluent from exiting the tank when the filter is removed. This means that the system is always protected even when the filter is being serviced or inspected. Maintenance sleeve comes with 1/2” pvc coupling attached. Simply add your desired length of 1/2” pvc pipe to make the handle.

Sim/Tech 7" Septic Tank Bristle Filter
Extend the life of your drainfield!

• Designed with non-directional bristles for unrestricted flow of effluent
• Allows biological maturing and sloughing to maximize septic tank efficiency
• Similar to already proven STF-110 (shown above), these filters were designed for larger housings (6" or 7") and pre-cast tanks with built in square baffles.
• Filtering surface is achieved with unique triangular bristle that more than doubles the filtering surface, with no uniform holes or slots to plug
• 90 degree handle for easy installation and removal
• Adapts to all types of 6" pipe
• Self-locking bristles hold the filter firmly in place, eliminitation "filter float up"
• Flexible design makes it easy to install in hard to reach places and makes replacing the filter a breeze
• The filters designed shape creates a debris separation space which naturally sorts debris according to size and mass, ensures even filter usage for a long lifespand and maximizes circular flow

PL-122 Effluent Filter System

• Over 122 linear feet of 1/16" filter slots, which significantly extends time between cleanings. Handles 1,500 GPD
• Has a flow control ball that shuts off the flow of effluent when the filter is removed for cleaning. The septic system will not function without replacing the filter. Therefore, no need to pump the tank to clean the filter.
• Has it's own gas deflector ball which allows the effluent to enter the filter from the sides, deflecting the solids away.
• It is modular; allowing you to increase your filtration area by just snapping two or more filters together. 

Tuf-Tite Gas/Solids Deflector
Fits EF-4 Combo or 4'' SDR-35 Pipe

Stops solids from leaving the septic tank and entering the septic field. Fits bottom of EF-4 Combo shown above or 4" SDR-35 pipe.

Polylok Extend and Lok™

This is used to extend the inlet or outlet pipes when they aren't long enough to accept the effluent filter tee or baffle. Simply hammer in the PVC friction fit and the filter can now be easily installed and centered under the riser.

• Fits any 4'' pipe
• Centers filter or tee under riser
• Easy Installation
• No gluing necessary

Tuf-Tite Xtendo-HUB™

Internal male Hub Connector. Extends 4" pipes that are flush with tank wall.