High Quality Polylok Risers and Lids Polylok Features:
|
![]() |
Because every riser and lid order is unique, and it requires extra time and material to ship these items, we are not able to offer free shipping for these items. To get a shipping cost, simply add the items to the cart.
Polylok Septic Tank Riser Lids Green. Model # PL-20RC, #PL-24RC Complete with 2 handles. Lids fit either of the above risers. Locks into position to allow easy installation of stainless steel screws (included). If buried, locate with metal detector. Comes complete with stainless steel screws and factory installed gasket. |
Includes and attaches with These lids combined with the risers and adapter ring can be used to replace your current concrete lids when used with the riser adapter ring below. Also, this lid can be used directly on the adapter ring without the use of the risers. |
Polylok Heavy Duty Watertight and Airtight! Fits securely on a Polylok riser. The 24" will also fit on corrugated pipe. Highest UV Package on the market today! These heavy duty covers were tested at an outside laboratory and passed standard static load testing to 5000 lbs., as well as center and off center impact load testing to 150 ft lbs. Both the 20" and 24" lids |
20'' Polylok Heavy Duty Lid Warning: Riser Cover Must Be 24'' Polylok Heavy Duty Lid |
6'' Tall Polylok Septic Tank Risers Green. Used to raise the height of your septic system lid. Easily STACKABLE! Can be adapted to anything from a septic tank to an aerobic system. Each riser has two knockouts for electrical connections. Measurements are inside diameter |
Includes and attaches with All Polylok Risers and Lids are |
12'' Tall Polylok Septic Tank Risers Green. Used to raise the height of your septic system lid. Easily STACKABLE! It has the same high quality as the 6" tall risers but with fewer screws you have to put together. Structural ribs inside prevent frost from adhering to the riser in frost prone areas. These 12" tall risers also accept 2", 3", 4" and corrugated pipe. Measurements are inside diameter. |
Includes and attaches with All Polylok Risers and Lids are |
Polylok 24'' Safety Pan Riser Can hold a secondary concrete plug for additional safety or can be used as a 3'' riser. Can be placed anywhere in the riser stack. |
All Polylok Risers and Lids are |
Polylok Safety Screens New Polylok 20” & 24” safety screens available. They act as a secondary layer of protection if the riser cover was unknowingly damaged or removed. The screen fits in the upper most Riser stack of the Polylok Risers and prevents entry into the septic tank. Highly Recommended |
|
Polylok Septic Tank Adapter for either 20" or 24" risers. Covers up to 25" square opening or up to a 27" round opening. This ring allows you to mount the risers to the septic tank. Very Easy. The risers simply attach with screws to this adapter ring |
Adapter Ring Recommended Includes drill bit, concrete anchors, bolts, and butyl sealant rope. |
![]() |
Butyl Sealant Rope Used to seal Tuf-Tite tank adapter |
![]() |