Little Giant Submersible Sump Pumps And Effluent Pumps

Little Giant Model ES33W1-10
Cast Iron Submersible Sump Pump
1/3 hp, 40 GPM, 1-1/2" Discharge, 3/8" Solids-handling

The ES33W1-10 pump from Little Giant is an energy-saving, high performance, fully submersible sump / effluent pump, designed for the professional plumbing contractor for use in residential and light commercial applications. Automatic operation is achieved with a piggyback wide angle remote float switch. The ES Series Pumps draw less energy while delivering greater pump flow and overall performance.

• Powerful Permanent Split Capacitor (PSC) motor for high starting and running torque, with upper sleeve and lower ball bearings.
• Mechanical shaft seal assures maximum protection against pump failure
• Epoxy coated cast iron motor housing for corrosion and rust resistance
• Automatic operation with piggyback wide angle remote float switch operates pump in approx. 12" of water and shuts pump off in about 4" of water

FREE SHIPPING

Little Giant Eliminator Model 9EN-CIA-RF
Submersible Effluent Sump Pump
4/10 hp, 80GPM @ 5ft, 1-1/2" Discharge, 3/4" Solids-handling

The 9EN Series submersible effluent pump from Little Giant is specifically engineered to handle the tough demanding tasks for wastewater and effluent waste transfer with high efficiency and long term dependability. Ideal for use in residential, commercial, industrial, and agricultural applications with light to medium transfer demands such as dewatering, effluent waste, wastewater, and handling where such materials must be moved upward from a collection area to sewer lines, septic lines, or drainage areas.

• Handles liquid and solid waste materials up to 3/4" diameter.
• 1-1/2" Discharge
• Cast iron pump housing with protective epoxy coating for corrosion and rust resistance.
• Oil filled motor housing for lifetime lubrication and rapid heat dissipation.
• Stainless steel screws, bolts, handle, and seal assembly.
• Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces).
• Thermal overload protection.
• Automatic operation has 9" - 14" "On" and , 2" - 6" "Off" level range with adjustable Remote Float Switch.

FREE SHIPPING

Little Giant Model 16EH-CIM Eliminator
Submersible Effluent Pump
1 hp, 2'' Discharge, 3/4'' Solids Handling, 90 GPM

The Eliminator Submersible High Head Effluent pumps are designed to handle 3/4" solids. Shut-off at 81', heavy-duty cast iron housing, volute and vortex impeller, thermal overload protection and 2" FNPT discharge.

• 1 HP PSC motor with overload protection
• Completely submersible, designed for continuous duty
• High head model
• Epoxy coated cast iron housing, cover, volute, and non-clog impeller
• Carbon/ceramic shaft seal
• Upper and lower ball bearings
• UL / CSA listed
• 1 hp, 90 GPM @ 30' Head, 230V, 81' Shut Off
• 3/4'' Solids Handling

FREE SHIPPING

*Item Ships on a Freight Truck due to its Weight.

Little Giant Model 20E-CIM Magnum
Submersible Effluent Pump
2 hp, 2'' Discharge, 3/4'' Solids Handling, 135 GPM

The Magnum submersible pumps from Little Giant are specifically engineered to handle the tough demanding tasks of wastewater and effluent waste transfer with high efficiency and long term dependability. The Magnum series includes pumps for use in Residential, Commercial Industrial and Agricultural applications with light to medium transfer demands. For dewatering, effluent waste and wastewater handling where such materials must be moved upward form a collection area to sewer or septic lines, or drainage areas, the Magnum is an ideal solution.

• 2 HP PSC motor with overload protection
• Completely submersible, designed for continuous duty
• Epoxy coated cast iron housing, cover, and volute
• Carbon/ceramic shaft seal
• Upper and lower ball bearings
• UL / CSA listed
• 2 hp, 135 GPM @ 20' of Head, 230V, 110' Shut Off
• 3/4'' Solids Handling

FREE SHIPPING

*Item Ships on a Freight Truck due to its Weight.

Little Giant Crawl Space
Sump System Model CS-SS 
1/3 hp, 1-1/2" MNPT Discharge, 1/2" Solids-handling

An ideal solution to help prevent water and moisture from collecting in the low areas of your crawl space. Removing this moisture aids in prevention of mold and fungus which causes allergies and odors, as well as moisture damage to wood floors, insulation and metal ductwork. Also helps minimize structural damage from freezing water which can cause your foundation to buckle. The CS-SS can also be used to help prevent water from standing in low lying problem areas such as yard, patio, driveway and other areas around your home.

• Cast iron pump housing with protective epoxy coating for corrosion resistance
• Handles liquid and solid waste material up to 1/2" dia.
• 1/3 HP shaded pole motor with thermal overload protection
• Automatic operation has "on" level at 7"-10" and "off" level at 2"-5"
• Intergal snap action float switch, 18" x 22" perforated basin, light weight and made of corrosion resistant polypropylene
• Structural foam cover with slip fit flanges
• 1-1/4" x 24" sump pump discharge hose kit with adaptors and hose clamps
• 1-1/2" MNPT x 1-1/4" barbed check valve
• Pump is UL and CSA approved

FREE SHIPPING

Compact Drainosaur®
Water Removal System
Includes 3-1/2 gallon tank and 1/3 hp Automatic Pump

Compact unit includes 3-1/2 gallon tank, only 10-1/2" high. Automatic submersible pump with mid-level activating switch and 8' power cord. Consult factory for specific replacement pump. Basin is IAPMO approved.

Applications:  Impractical gravity drainage
areas, under sink, laundry trays

• 1/3 HP Shaded Pole Motor
• 46 GPM
• 18' Maximum Head
• Intermittent Liquid Temp. up to 125°F
• 1 1/2" FNPT Discharge
• Epoxy coated cast iron housing
• Polycarbonate Cover
• Polypropylene Volute
• Nylon Impeller
• Carbon/Ceramic Shaft Seal
• Upper and lower bearings
• Automatic Operation
• Diaphragm switch Activator
• Switch on - 4" - 7"
• Switch off - 1" - 3"
• 115V, 50/60Hz, 9 amps

FREE SHIPPING