Liberty FL100-Series 1.0 HP Submersible Effluent Pump
Print105 MAX GPM, 89 FT MAX HEAD, 2'' DISCHARGE
The Liberty FL100-Series Submersible Effluent Pumps provide efficient, low-cost pumping in high head on-site wastewater systems, liquid waste transfer, and commercial sump applications. Built of heavy cast iron with stainless steel fasteners for years of reliable performance. Automatic operation is achieved with a wide angle mechanical float switch with a piggyback plug.
In Stock
Item #:FL102A
Manufacturer: Liberty Pumps
Liberty FL100-Series Specifications
- Model FL102A
- 1.0 HP, 208-230VAC, 12.0A, 60 Hz
- 60 GPM @ 60ft of Head Pressure
- Shut Off: 89ft, Max GPM: 105
- 2'' NPT Vertical Female Discharge, 3/4'' Solids Handling
- Vortex Impeller Made of High Temp Engineering Polymer Permits Passage of Solids without Clogging
- Includes Quick-Disconnect 25' Power Cord with Plug
- Includes 25' Wide Angle Mechanical Float Switch with Piggyback Plug
- Dimensions: 11.8'' L x 8.2'' W x 18.3'' T
- Three Year Warranty
Liberty FL100-Series Applications
An effluent pump is typically used in septic tank applications. Effluent is the gray wastewater that remains after the solids settle out. These pumps can handle smaller solids up to 3/4’’ in size. These units are normally used to pump discharge from a septic tank or an aerobic system to a drain field, secondary treatment system, or surface discharging point.
- STEP Systems
- LPP Systems
- Mound Systems
- Liquid Waste Transfer
- Commercial Sump Applications
- Effluent and Wastewater Removal